Build a More Connected Jobsite

Key Features

• Fast, clean cuts in 10ga Mild Steel
• Tight turns, enhanced control
• Lighter weight
• Variable Speed Trigger and Variable Speed Mode Select Provide Maximum Control for any Job
• Tool Free 360 Degree Die Holder Rotation
• LED Work Light
• Chip Collection Bag Included for Easy Clean Up
• Compatibility across the entire M18™ System
• POWERSTATE™ Brushless Motor

Key Features

• Automatic Alignment Up-To 125'
• 70% Brighter, when in the Boosted Mode and compared to the 3632 M12™ Green 3-Plane Laser
• 10+ Hours of Runtime
• Remote Brightness Adjustment - Standard, Boost & Off
• Micro Control - Pivots on Point
• 125 ft. Working Range
• 165 ft. Range with Detector
• Accuracy: +/- 1/8" @ 33 ft
• Automatic Alignment Accuracy: +/- 1/8" @ 125 ft
• Amplified Rare Earth Magnets - Will Not Slide on Steel Studs
• Self Leveling: +/- 4° Tilt
• IP54 Rated: Water and Dust Resistant
• 1m Impact Resistance
• ONE-KEY™ Tracking and Tool Management
• 1/4-20 & 5/8-11 Thread Mount

Key Features

• Dual Trigger: Two Handed Activation.
• ONE-KEY™ Track & Manage.
• POWERSTATE™ Brushless Motor: Built for the M18 FUEL™ Dual Trigger Deep Cut Band Saw delivers 550 SFPM to provide the power needed to compete on the toughest applications.
• Lightest Weight, Less Fatigue.
• Faster Cuts: More Work Done
• Up to 78 cuts per charge: in 1-5/8" Unistrut
• Cut Capacity: 5" x 5"
• Cut-Brake: When selected, automatic blade brake to reduce the risk of damage to sensitive materials near the cut.
• Integrated Rafter Hook, Tether Attachment & Blade Covers
• Tool Free Adjustable Shoe
• Variable Speed Trigger & Mode Select: Enhanced Control.

Key Features

• POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 7" Angle Grinder delivers 8,400 RPM to provide the power to complete the toughest grinding and cutting applications.
• REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
• M18™ REDLITHIUM™ FORGE™ XC8.0 Battery Pack delivers you HIGH OUTPUT™ HD12.0 power in a smaller size and the longest life vs. REDLITHIUM™ batteries.
• Compact, 7" angle grinder fits in tight spaces while handling tough tasks
• Variable speed provides 4 speed settings between 5,000-8,400 RPM
• Overload Protection: Maximizes motor life
• Electronic clutch for kickback protection
• ONE-KEY™ Compatible: Ability to customize, track and manage tools for increased productivity and investment protection
• Anti-Vibration Side Handle: Reduces vibration, increasing user comfort during extended use
• 5/8"-11 Spindle for use with common grinding accessories
• Compatible with all M18™ Batteries

Key Features

• POWERSTATE™ Brushless Motor: Delivers 9,000 RPM to provide the power to complete the toughest grinding and cutting applications.
• M18™ REDLITHIUM™ FORGE™ XC8.0 Battery Pack delivers you HIGH OUTPUT™ HD12.0 power in a smaller size and the longest life vs. REDLITHIUM™ batteries.
• RAPIDSTOP™ Brake stops most wheels in less than 2 seconds
• Variable speed provides 4 speed settings between 3,000 RPM and 9,000 RPM for greater control
• Electronic Clutch for Kickback Protection
• ONE-KEY™ Compatible: Ability to customize, track and manage tools for increased productivity and investment protection
• REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of
• performance, protection, and compatibility.
• Overload Protection to Maximize motor life
• Anti-Vibration Side Handle: Reduces vibration, increasing user comfort during extended use
• Streamlined Handle Grip Size for Increased Control and Ease-Of-Comfort
• 5/8"-11 Spindle for use with common grinding accessories
• Compatible with all M18 batteries

Key Features

• Lightest, most balanced inline design delivers maximum control
• PREDICTIVE FORCE MONITORING (PFM™) helps measure output force
• Fastest 11T Dieless Crimper
• Produces connections that meet ANSI C119.4 and UL486A-B certifications on several leading brands of utility connectors
• Inline design & 340° rotating head for easy access in tight spaces
• Enlarged trigger designed specifically for use with Class 3 gloves
• Easy to reach electronic release button enables easy activation for right- and left-handed users
• Quick Release and Push-to-Close latch pin design provides easy access around splices
• Pre-crimp battery check automatically ensures enough charge to complete each crimp
• Instant verification of successful cycle with green LED
• Hydraulic system optimized for consistent performance from -4° to 140° F
• Records & stores every crimp made for professional report building through ONE KEY™
• Longer life with POWERSTATE™ brushless motor & weather protected electronics that keep dirt, dust & moisture out

Key Features

• Inline design delivers unmatched access
• Lightest weight allows maximum control
• PREDICTIVE FORCE MONITORING (PFM™) ensures full pressure
• Inline design and 340° rotating head for unmatched access into confined spaces
• Enlarged trigger and slim grip area designed specifically for use with Class 3 gloves
• Easy to reach dual electronic release buttons enable easy activation for right- and left-handed users
• Compatible with all industry standard W-Style dies
• Optimized latched head enables dies to be inserted while latch is closed
• Hydraulic system optimized for consistent performance from -4° to 140° F
• Instant verification of a successful cycle with Green LED
• Pre-crimp battery check automatically ensures enough charge to complete each crimp
• Records & Stores Every Crimp Made for Professional Report Building through ONE-KEY™
• Compatible with the entire M18™ System

Key Features

• Lightest, most balanced inline design delivers maximum control
• PREDICTIVE FORCE MONITORING (PFM™) ensures full pressure
• Fastest 12T crimper
• Inline design & 340° rotating head provides easy access in tight spaces
• Quick release and push-to-close pin design provides easy access around splices
• Compatible with all industry standard U-dies
• Creates UL Classified crimps under UL 486A-B for #8 – 750 MCM Cu and Dual Rated lugs and splices across several leading manufacturers when used with corresponding Milwaukee® dies
• Pre-crimp battery check automatically ensures enough charge to complete each crimp
• Instant verification of successful cycle with green LED
• Hydraulic system optimized for consistent performance from -4° to 140° F
• Longer life with POWERSTATE™ brushless motor & weather protected electronics that keep dirt, dust & moisture out
• Records & stores every crimp made for professional report building through ONE KEY™
• Compatible with the entire M18™ System

Key Features

• Cuts up to 5” (127 mm) Diameter Communications, Armored, Lead Sheath, Copper, and Aluminum Power Cables
• Wireless remote communicates with the tool via a mutually exclusive Bluetooth connection, removing any physical connection to the tool and allowing Cable Splicers to make remote cuts wirelessly
• Green LED light on wireless remote gives positive indication that the tool is done cutting
• Converts from local to remote cutting mode easily with connection up to 200' line of sight
• Balanced design, 360° adjustable d-handle and hang hook enable easiest set-up in vaults
• Records & stores every cut made for professional report building through ONE KEY™

Key Features

• Milwaukee POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
• REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
• M18™ REDLITHIUM ™ XC5.0 battery pack (not included) delivers up to 35 Pipes Deburred.
• 5 Speeds, Increased Control, Allows users to alter the speed based on the application
• RAPIDSTOP™ Brake stops most wheels in less than 2 seconds
• LED Work Light, Maximizing Visibility
• ONE-KEY™ Tracking and Tool Management
• Spindle Lock, One Wrench Accessory Change
• Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions
• Fits all 1/4" Shank Accessories
• 20,000 RPM Brushless Motor is designed to deliver corded performance with 2" Cutting Wheel and 3" Sanding Wheel l Compatibility
• Compatible with all M18™ Batteries

Key Features

• Eliminates compressors and hoses providing lower cost of ownership, greater productivity, more portability and more safety
• Installs HUCK™ Bobtail®, Magna Grip® and C6L® Lockbolt Fasteners
• Installs up to 1,200 1/4" AL Magna-Grip Lockbolt Fasteners in one REDLITHIUM M18 XC5.0AH Battery Charge
• Compatible with HUCK™ Lockbolt Tip Models 99-7932, 99-7932CC, 99-2555, 99-3417, 99-3201, 99-3204, and 99-3464.
• POWERSTATE™ Brushless Motor delivers 4,500 lbs. (20kN) of pulling force for high strength blind rivets in all materials
• Installs 3/16" (4.8mm), 7/32" (6.0mm), 1/4" (6.4mm) and 9/32" (7.0mm) aluminum, steel, and stainless steel Blind Rivets with purchase of M18 1/4" Lockbolt to Blind Rivet Tool 49-16-2661R
• Up to 35% faster than cordless competitors
• Premium rubber overmolds withstand corrosive materials and provides increased comfort when in use
• Installs HUCK(TM) Hucktainer Fasteners with purchase of Hucktainer Fastener Adaptor 49-16-2661HT

Key Features

• 1080p camera resolution provides the industry's clearest image inside of drain lines
• 25 mm self-leveling HD camera head with Sapphire Crystal lens
• 100’ Flexible Push Cable provides best maneuverability in tight bends and traps
• Powered by the M18™ 500GB Control Hub
• Lightweight, compact design for best portability (strap included)
• On board monitor mount for viewing and transportation
• Swap batteries without system shutdown

Key Features

• Power to Descale up to 75' Out
• Easiest, Most Controlled Wall to Wall Clean
• Clear 150' of Scale Build-up Per Charge
• Mechanical Clutch to Help Prevent Cable Damage in Bind Ups
• Infinite Variable Speed Adjustment for a Controlled Cleaning Experience
• Easily Access the Variable Speed Dial for in Application Adjustments
• Electronic Foot Pedal With Non-Slip Grip: Maximum Durability
• Bi-Directional Cable for Improved Navigation
• Stainless Steel Set Screws for Corrosion Resistance
• Partially Enclosed Drum for Mess Containment & Easy Cable Cleaning
• Telescoping Handle & Durable Wheels for Easy Transport On and Off the Job
• Additional Accessories Available: 1-1/2” Carbide (48-53-3024), 2” Carbide (48-53-3025), 3” Carbide (48-53-3026), 4” Carbide (48-53-3027), Grease Penetrating Head (48-53-3028).

Key Features

• High resolution camera provides the industry's clearest image inside of drain lines
• 25 mm self-leveling HDR camera head with Sapphire Crystal lens
• Pitch sensing feature for easier diagnosis and more effective reporting
• Removable backpack straps for hands-free carrying
• Powered by the M18™ 500GB Control Hub
• Onboard monitor mount for viewing and transportation
• Swap batteries without system shutdown

Key Features

• High resolution camera provides the industry's clearest image inside of drain lines
• 34 mm self-leveling HDR camera head with Sapphire Crystal lens
• Pitch sensing feature for easier diagnosis and more effective reporting
• 12 mm Push Cable Diameter provides stiffness to push maximum distance
• Telescoping handle and wide wheelbase provide maximum stability
• Swap batteries without system shutdown
• Powered by the M18™ 500GB Control Hub
• On board monitor mount for viewing and transportation

Key Features

• Lightest Weight, Less Fatigue
• 2-in-1 Design, Simplified Dust Compliance
• Fastest Drilling for Small Ceiling Anchors
• > 100 holes per charge on the M18 REDLITHIUM™ HIGH OUTPUT™ CP3.0 battery
• Ergonomic Side Handle
• Integrated Dust Extractor
• AUTOSTOP™ kickback control prevents severe kickback
• ONE-KEY™ Compatible: Ability to track and manage tools
• Depth Stop
• Anti-Vibration System (AVS): Minimizes vibration for maximum comfort
• AUTOPULSE™ Filter Cleaning Mechanism: Automatically cleans the dust extractor filter after use
• Dust Extractor with HEPA Filters
• Hanging Hook
• Replaceable Dust Tubes
• 5 Year Warranty

Key Features

• Withstands 1.5m Drops - Reinforced Housing
• Simplified Menu Navigation
• Remote Slope Adjustment - Duplicated Display
• 1/16 In. Horizontal Accuracy @ 100 Ft. / 1/8 In. Vertical Accuracy @ 100 Ft.
• 4000 Ft. (Diameter) Working Range w/Receiver
• Laser Receiver: Reduces Interference - Strobe Light Protection
• Receiver Features Automatic Grade Match
• 600, 900, 1200 RPM Modes
• Low/High Bump Sensitivity Modes
• IP 66 Rated Protection
• 5/8" - 11 Threaded Insert
• Grade Rod - 8 Ft. w/ Ft. & In. Graduations
• ONE-KEY Compatible - Track and Manage Tool's Location
• Fits All M18™ Batteries
• 5 Year Tool Warranty, 3 Year Battery Warranty, 2 Year Receiver Warranty, 3-Year Tripod Warranty

Key Features

• Withstands 1.5m Drops - Reinforced Housing
• Simplified Menu Navigation
• Remote Slope Adjustment - Duplicated Display
• 1/16 In. Horizontal Accuracy @ 100 Ft. / 1/8 In. Vertical Accuracy @ 100 Ft.
• 4000 Ft. (Diameter) Working Range w/Receiver
• Laser Receiver: Reduces Interference - Strobe Light Protection
• Receiver Features Automatic Grade Match
• 600, 900, 1200 RPM Modes
• Low/High Bump Sensitivity Modes
• IP 66 Rated Protection
• 5/8" - 11 Threaded Insert
• ONE-KEY Compatible - Track and Manage Tool's Location
• Fits All M18™ Batteries
• 5 Year Tool Warranty, 3 Year Battery Warranty, 2 Year Receiver Warranty, 3-Year Tripod Warranty

Key Features

• Withstands 1.5m Drops – Reinforced Housing
• Automatic Alignment: Center Find
• Simplified Menu Navigation
• 1/16" Horizontal Accuracy 1/8" Vertical Accuracy
• 1,000 Ft. (Diameter) Working Range w/Receiver
• 300, 600, 1,200 RPM
• Sweep Mode – Variable Scan Angles
• Vertical Plumb Dot
• Laser Remote/Receiver Reduces Interference - Strobe Light Protection
• Laser Remote/Receiver Features Easy Read Backlit Display
• IP 66 Rated Protection
• Low/High Bump Sensitivity Mode
• ONE-KEY™ Tracking and Tool Management
• Fits All M18™ Batteries
• 5 Year Tool Warranty, 3 Year Battery Warranty, 2 Year Remote/Receiver Warranty, and 3 Year Wall Mount Warranty

Key Features

• Withstands 1.5m Drops – Reinforced Housing
• Prevents Beam Interference: Masking Shutters
• One-Button Setup
• 3/32 In. Accuracy @ 100 ft.
• 70 Hours of Run-Time
• Laser Receiver Reduces Interference - Strobe Light Protection
• Laser Receiver Features Easy Read Backlit Display
• 2000 Ft. (Diameter) Working Range w/Receiver
• 600 RPM
• Low/High Bump Sensitivity Modes
• IP66 Rated Protection
• 5/8-11 in. Threaded insert
• ONE-KEY™ Tracking and Tool Management
• Fits All M18™ batteries
• 5 Year Tool Warranty, 3 Year Battery Warranty, 2 Year Receiver Warranty, 3-Year Tripod Warranty

Key Features

• Withstands 1.5m Drops – Reinforced Housing
• Prevents Beam Interference: Masking Shutters
• One-Button Setup
• 3/32 In. Accuracy @ 100 ft.
• 70 Hours of Run-Time
• Laser Receiver Reduces Interference - Strobe Light Protection
• Laser Receiver Features Easy Read Backlit Display
• 2000 Ft. (Diameter) Working Range w/Receiver
• 600 RPM
• Low/High Bump Sensitivity Mode
• IP66 Rated Protection
• 5/8-11 In. Threaded Insert
• ONE-KEY™ Tracking and Tool Management
• Fits All M18™ Batteries
• 5 Year Tool Warranty, 3 Year Battery Warranty, 2 Year Receiver Warranty

Key Features

• 1 Metric Ton (2,204lbs), 20ft Chain
• One Man Carry - 46lbs
• Wireless Remote with up to 60ft Range
• Effortless Installs. Less Down Time. Improved Mobility
• Inverted and Standard Installs
• Enhanced Control: Variable Speed and Fine Adjustment
• Hoist Battery Light Indicator
• Hoist Inspection Interval and Record Storage Via ONE-KEY™
• 5 Year Tool Warranty, 3 Year Battery Warranty

Key Features

• TORQUE-SENSE™ torque control delivers MORE TORQUE REPEATABILITY than blow counting impact wrenches by utilizing proprietary sensors and machine learning developed algorithms to overcome common jobsite variability
• Simplified setup process via ONE-KEY™ eliminates guess-and-check process to deliver target torque
• Tool output data is stored and is available for download to create customizable tool reports
• Increased torque repeatability compared to current two-step process, allows for up to 3X faster installation
• Target torque range: 50 – 250 ft.lb
• User feedback LED light shows OK/NOK installation
• TORQUE-SENSE™ error reduction feature set includes low battery shutoff, double-hit prevention, early trigger release detection, F/R direction lock, programmable LED colors, and torque recheck timer
• Over-the-Air update capable for future mode improvements
• Reinforced M18™ battery connection providing improved durability and battery retention over life
• REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• POWERSTATE™ brushless motor delivers maximum torque output
• Tri-LED lighting
• 1 year tool warranty
• Part of the M18™ System, featuring over 250+ solutions

Key Features

• TORQUE-SENSE™ torque control delivers MORE TORQUE REPEATABILITY than blow counting impact wrenches by utilizing proprietary sensors and machine learning developed algorithms to overcome common jobsite variability
• Simplified setup process via ONE-KEY™ eliminates guess-and-check process to deliver target torque
• Tool output data is stored and is available for download to create customizable tool reports
• Increased torque repeatability compared to current two-step process, allows for up to 3X faster installation
• Target torque range: 50 – 250 ft.lb
• User feedback LED light shows OK/NOK installation
• TORQUE-SENSE™ error reduction feature set includes low battery shutoff, double-hit prevention, early trigger release detection, F/R direction lock, programmable LED colors, and torque recheck timer
• Over-the-Air update capable for future mode improvements
• Reinforced M18™ battery connection providing improved durability and battery retention over life
• REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• POWERSTATE™ brushless motor delivers maximum torque output
• Tri-LED lighting
• 1 year tool warranty
• Part of the M18™ System, featuring over 250+ solutions

Key Features

• TORQUE-SENSE™ torque control delivers MORE TORQUE REPEATABILITY than blow counting impact wrenches by utilizing proprietary sensors and machine learning developed algorithms to overcome common jobsite variability
• Simplified setup process via ONE-KEY™ eliminates guess-and-check process to deliver target torque
• Tool output data is stored and is available for download to create customizable tool reports
• Increased torque repeatability compared to current two-step process, allows for up to 3X faster installation
• Target torque range: 50 – 150 ft.lb
• User feedback LED light shows OK/NOK installation
• TORQUE-SENSE™ error reduction feature set includes low battery shutoff, double-hit prevention, early trigger release detection, F/R direction lock, programmable LED colors, and torque recheck timer
• Over-the-Air update capable for future mode improvements
• Reinforced M18™ battery connection providing improved durability and battery retention over life
• REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• POWERSTATE™ brushless motor delivers maximum torque output
• Tri-LED lighting
• 1 year tool warranty
• Part of the M18™ System, featuring over 250+ solutions

Key Features

• TORQUE-SENSE™ torque control delivers MORE TORQUE REPEATABILITY than blow counting impact wrenches by utilizing proprietary sensors and machine learning developed algorithms to overcome common jobsite variability
• Simplified setup process via ONE-KEY™ eliminates guess-and-check process to deliver target torque
• Tool output data is stored and is available for download to create customizable tool reports
• Increased torque repeatability compared to current two-step process, allows for up to 3X faster installation
• Target torque range: 50 – 150 ft.lb
• User feedback LED light shows OK/NOK installation
• TORQUE-SENSE™ error reduction feature set includes low battery shutoff, double-hit prevention, early trigger release detection, F/R direction lock, programmable LED colors, and torque recheck timer
• Over-the-Air update capable for future mode improvements
• Reinforced M18™ battery connection providing improved durability and battery retention over life
• REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• POWERSTATE™ brushless motor delivers maximum torque output
• Tri-LED lighting
• 1 year tool warranty
• Part of the M18™ System, featuring over 250+ solutions

Key Features

• TORQUE-SENSE™ torque control delivers MORE TORQUE REPEATABILITY than blow counting impact wrenches by utilizing proprietary sensors and machine learning developed algorithms to overcome common jobsite variability
• Simplified setup process via ONE-KEY™ eliminates guess-and-check process to deliver target torque
• Tool output data is stored and is available for download to create customizable tool reports
• Increased torque repeatability compared to current two-step process, allows for up to 3X faster installation
• Target torque range: 50 – 150 ft.lb
• User feedback LED light shows OK/NOK installation
• TORQUE-SENSE™ error reduction feature set includes low battery shutoff, double-hit prevention, early trigger release detection, F/R direction lock, programmable LED colors, and torque recheck timer
• Over-the-Air update capable for future mode improvements
• Reinforced M18™ battery connection providing improved durability and battery retention over life
• REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• POWERSTATE™ brushless motor delivers maximum torque output
• Tri-LED lighting
• 1 year tool warranty
• Part of the M18™ System, featuring over 250+ solutions

Key Features

• Strut Support plate offers a quick 4in/10cm measurement offset for simple, repeatable shears.
• No exposed blades.
• Installation ready cuts with no filing and deburring.
• Tri-Stand chain vice mount allows easy integration into any brand chain vice.
• 250+ shears on 1-5/8” Pre-Galv Strut on a single M18 XC 5.0ah charge.
• Die Retention Arm allows for tool free die change.
• Two Stage Trigger activates the LEDs without activating the tool.
• Dual LEDs provide light to both sides of the head to properly illuminate the working area.
• Auto ram return on trigger release allows for instant set up for your next shear.
• Trigger Lock Out prevents unwanted tool activation in transport, set up, and tear down.
• Compatible with ALL M18™ Batteries and Chargers.

Key Features

• POWERSTATE™ Brushless Motor delivers unmatched power for full range of capability to complete the widest variety of applications
• Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
• ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
• Tri-LED Lighting for maximum workspace visibility
• Compact Size (4.47\") for access in tight spaces
• 4-Mode Drive Control
• 2000 in-lbs of torque
• 3900 RPM
• Single Handed Bit Insertion for Ease of Use
• 2.2lbs
• All-metal belt clip for portability
• Compatible with all M18™ batteries & chargers
• Most Powerful
• Fastest Driving Speed
• Ultimate Trigger Control

Key Features

• Most Powerful Hammer Drill
• Only 6.9\" in length for access into tight spaces and reduced fatigue
• AUTOSTOP™ Control Mode, Enhanced Safety
• POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
• Fastest Drilling and Driving applications under load
• AUTOSTOP Feature to Protect from over rotation in a bind up for enhanced safety, equipped with a dedicated AUTOSTOP light on foot of tool to indicate a protection event
• 1/2\" all-metal chuck with carbide teeth for maximum durability, grip and bit retention
• Mechanical Clutch for consistency in driving a wide range of fasteners
• Unmatched Performance with the most runtime in class with the XC5.0Ah batteries
• Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
• All-metal belt clip for portability
• 1400 in-lbs of torque
• LED light for better visibility in low-light situations

Key Features

• Most Powerful Drill
• Only 6.9\" in length for access into tight spaces and reduced fatigue
• AUTOSTOP™ Control Mode, Enhanced Safety
• POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any drill driver
• Fastest Drilling and Driving applications under load
• AUTOSTOP Feature to Protect from over rotation in a bind up for enhanced safety, equipped with a dedicated AUTOSTOP light on foot of tool to indicate a protection event
• 1/2\" all-metal chuck with carbide teeth for maximum durability, grip and bit retention
• Mechanical Clutch for consistency in driving a wide range of fasteners
• Unmatched Performance with the most runtime in class with the XC5.0Ah batteries
• All-Metal Gearcase for ultimate durability
• All-metal belt clip for portability
• 1400 in-lbs of torque
• LED light for better visibility in low-light situations

Key Features

• 9,000 Lumens of TRUEVIEW™ High Definition Output for Maximum Coverage
• TRUEVIEW™ High Definition Output provides neutral white color and produces an even beam pattern for clearer visibility
• Powered by One or Two M18™ Battery Packs for Extended Runtime
• High Impact Polycarbonate Lens
• Integrated Two-Bay Sequential Charger
• 180° and 360° Electronic Light Control
• Low Battery Indicator
• Plug-In and Daisy Chain
• IP54 Water and Dust Resistant
• ONE-KEY™ Customize. Track. Manage
• ONE-KEY™ Technology allows you to set light remotely from up to 100ft
• LED Limited Lifetime Warranty: LEDs never need to be replaced
• Part of the M18™ System, featuring 200+ solutions

Key Features

• Lightest cordless threading solution optimized for service and repair work
• AUTOSTOP™ kickback control prevents severe kickback
• Side grip thread starts eliminate engagement with spinning die head
• Dedicated support arm enables threading without pipe stand and controls the tool while threading
• Kitted with military grade aluminum Milwaukee® compact die heads
• Threads up to 1-1/4” pipe
• Threads several materials including black iron pipe, stainless steel, ridgid metal conduit and more
• Increased productivity and reduced fatigue vs. manual ratcheting threading
• One-Key™ technology allows for tracking, tool security, and inventory management
• POWERSTATE™ brushless motor provides more power, more run-time, and longer life
• REDLINK PLUS™ intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.

Key Features

• POWERSTATE™ Brushless Motor delivers maximum power and long motor life
• REDLINK PLUS™ Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating, and over-discharging.
• The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18™ REDLITHIUM™ XC battery packs
• 3.6 ft-lbs Impact Energy
• ONE-KEY™ technology allows for tracking, tool security, and inventory management
• AVS Anti-Vibration System: Minimizes vibration for maximum comfort
• 3 Mode: Rotary Hammer, Hammer Only, Rotary Only
• 800 RPM
• 4,600 BPM
• Part of the M18™ system, featuring over 200+ solutions

Key Features

• Up to 4X digital zoom, for better clarity
• Daylight readable screen for increased visibility outside
• Water resistant display provides protection against water and debris
• 800 x 600 daylight readable screen for better visibility in direct sunlight
• Compact, light weight design for easy transportation
• Backlit buttons for increased visibility
• Up to 9 hours of runtime with an M18™ REDLITHIUM™ 5.0AH Battery
• On screen battery gauge and wireless signal strength
• Rubber over mold and screen cover for increased durability

Key Features

• 8.1 ft lbs Impact Energy
• Generates 15A Corded Power
• Max Control, Enhanced Safety
• Chips 1/2 Ton of Material Per Charge
• ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection
• 380 RPM
• 2,900 BPM
• AUTOSTOP™ E-Clutch
• 10 m/s² Vibration
• 2 Mode: Rotary Hammer and Hammer Only
• 8.1 ft-lbs Impact Energy
• Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
• REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions.
• 2 Modes: Rotary Hammer & Hammer Only

Key Features

• Up to 200' of wireless connectivity
• Onboard USB port allows for saving findings on memory stick
• One-Key™ technology allows for tracking, tool security, and inventory management
• Up to 9 hours of runtime with an M18™ Red Lithium™ 5.0AH Battery
• Wired connection backup to the M18 Wireless Monitor via USB-C port
• Watertight battery door protects against water and debris
• Integrated handle and latch allow for easy one-handed installation

Key Features

• POWERSTATE™ Brushless Motor delivers the power to clear heavy roots out to 150ft
• M18™ REDLITHIUM™ High Output™ HD12.0 Battery powers through multiple jobs on a single charge.
• REDLINK PLUS™ Intelligence ensures maximum performance under load
• Lighest, most portable for the easiest set up and transportation
• Tool-free cable size changes ensures that switching between 5/8" and 7/8" cable takes only seconds
• On-board pin key storage for convenient decoupling of cables and cable attachments
• No tool lubrication required
• Enclosed Cable Reels: Containing the Mess of Used Cables
• Rear Guide hose is optimized for easiest transportation

Key Features

• POWERSTATE™ Brushless Motor Delivers Power to Clear Roots 200ft
• M18™ REDLITHIUM™ High Output™ HD12.0 Battery powers through multiple jobs on a single charge, the first to bring cordless mobility, safety, and power supply to the drain cleaning industry
• REDLINK PLUS™ Intelligence ensures maximum performance under load
• CABLE-DRIVE™ Automatic Feed and Retract reduces user fatigue
• Easiest Set Up and Transport
• Enclosed Cable Reels: Containing the Mess of Used Cables
• Utilizes 7/8" and 1-1/4" Cables
• Warranty: 5 Year Tool / 2 Year Battery

Key Features

• Up to 1500 ft-lbs Nut-Busting Torque
• Most Compact
• Most Repeatable Torque
• POWERSTATE™ brushless motor delivers up to 1200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque
• Most compact cordless High Torque Impact Wrench in its class at 8.59" in length
• ONE-KEY™ Compatible: Customize, Track and Manage tool’s performance and location
• M18 FUEL with ONEKEY™ technology provides the most repeatable Impact Wrench in the industry
• Easily toggle up to four custom performance profiles that can be saved to the memory of the tool
• Features a friction ring with thru-hole design to ensure quick and easy socket changes
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• LED light to illuminate the work area
• Part of the M18 System, featuring over 150+ tools

Key Features

• POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench
• Up to 7 lbs. Lighter Weight allowing for less user fatigue
• Eliminates Compressors and Generators, providing greater portability and lower cost of ownership
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power.
• Integrated lanyard loop allows for safer use and easier storage
• REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
• Handle rotates 270 degrees and easily adjusts without a tool
• LED light to illuminate work areas
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Compatible with all M18™ batteries

Key Features

• 24-1/2" Rip Capacity to rip 4x8 sheets of plywood or OSB
• All metal frame to handle tough jobsite conditions
• On board storage for guard, riving knife, push stick, fence and miter gauge
• POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 8-1/4" Table Saw w/ One-Key(TM) to provide the power and performance of a 15A corded table saw.
• Rack and Pinion Fence System for square cuts and easy adjustment
• REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System.
• REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions.
• Single wrench blade change
• Tool free guard and riving knife changes

Key Features

• Comfortable horizontal handle for convenient on/off operation
• Dual Horizontal Steel Rails with Three Large Linear Bearings-deliver smooth sliding action
• Light weight aluminum construction for easy portability
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
• Tall Sliding / Removable Fences to Support Large Base and Crown Against The Fence
• Detent Override for Easily Setting Miter Locations Outside of Detents
• Integrated top and side carry handles for easy transportation
• Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life.
• Shadow cut line indicator for quickly lining up cuts
• REDLITHIUM™ High Output HD12.0 Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions.

Key Features

• SWITCH PACK™ drums: interchange and connect various cable drums up to 100 ft.
• Built-in backpack straps: easiest transport
• Integrated drum brake: electronically slows drum up to 5-times faster than competitor drum machines
• Electronic foot pedal with non-slip grip: maximum durability
• Fully enclosed drum: best protection and mess containment
• Drain line capacity: 100 ft. x 1/2 in. inner core cable; 100 ft. x 5/8 in. open wind cable
• SWITCH PACK™ drum capacity: 75 ft. x 5/16 in. inner core cable; 50 ft. x 3/8 in. and 1/2 in. inner core cable; 50 ft. x 5/8 in. open wind cable
• 250 RPM spin speed
• On-tool accessory attachment storage
• 5-year tool warranty, 3-year battery warranty
• Compatible with non-Milwaukee cables

Key Features

• Auto-Stop™ Kickback Control
• AUTOSTOP™ kickback control prevents severe kickback
• Compatible with ridgid® 12-R and Reed R12+ die heads
• Dedicated Support Arm enables threading without pipe stand
• Fits M18™ Batteries
• Magnesium enforced carry handle
• Multi-Speed Selector optimizes thread quality across pipe sizes
• Offset die head for closer threading near pipe bends and against walls.
• ONE-KEY™ technology allows for tracking, tool security, and inventory management
• Over 25, 2” pipe threads per charge
• POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.
• Side grip and die head retention lock for no engagement with spinning die head
• Side Grip Thread Starts
• Threads Faster than Corded

Key Features

• 1080p camera resolution providing the industry's clearest image inside of drain lines
• 25 mm self-leveling HD camera head with Sapphire Crystal lens
• 10mm Push Cable Diameter provides best mix of stiffness and flexibility
• Line Capacity: 2"-6"
• Sonde Frequency: 512Hz, 33 KHz
• Line Trace Frequency: 33kHz, 83kHz
• Powered by the M18™ 500GB Control Hub
• Removable backpack straps for hands-free carrying
• Onboard monitor mount for viewing and transportation

Key Features

• Compatible with all 10,000psi (700bar) rated hoses and single-acting accessory heads
• Easiest Set-Up: 80% Smaller, 75lbs Lighter than Gas Units
• Gas-Like Performance: 24sec Cycle Times and Up to 60 Presses on a Single Charge on 1590 ACSR Connectors
• 3X the High-Pressure Flow Rate of Competitive Cordless Units
• 3-Modes of Operation: Auto-Dump, Hold-Pressure & Remote Cut
• Remove the physical connection to a potentially live cable with mutually exclusive wireless pairing in Wireless Mode
• Available Bucket Hanger Accessory Ensures Ideal Operating Position – Fits Most Buckets & Baskets
• IP54 Rated Ingress Protection with Sealed Battery Door
• 6ft Controller Cord with On-Board Storage for Easy Operation
• Battery Check Automatically Ensures Enough Charge to Complete Each Application (HD8.0ah batteries and up)
• PFM™ (Predictive Force Monitoring) Provides Instant Pressure Verification with Green Indicator
• Records & Stores Every Cycle Made for Professional Report Building through ONE-KEY™
• Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out

Key Features

• 4,400 Lumens of TRUEVIEW™ High Definition Output
• TRUEVIEW™ High Definition Output provides neutral white color and produces an even beam pattern for clearer visibility
• Task, Area, and Overhead Lighting
• High Impact Polycarbonate Lens
• AC In and Out: String up to 10 together
• ONE-KEY™ Integrated Tool Tracking & Security
• IP54 Rated: Water and Dust Resistant
• ONE-KEY™ Technology allows you to set light remotely from up to 100 ft
• Powered by M18 REDLITHIUM Battery or Extension Cord
• Protected AC Plugs
• Self-Centering Metal Hook for Easy Overhead Hanging
• 180° and 360° Electronic Light Control
• Low Battery Indicator
• LED Limited Lifetime Warranty: LEDs never need to be replaced
• Part of the M18™ System, featuring 200+ solutions

Key Features

• Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life.
• The Milwaukee® REDLITHIUM™ Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life.
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
• Cuts up to 1500MCM Copper
• 15kV cable
• In-line design delivers easiest access in trenches
• Top-handle layout provides balanced cut alignment
• Powerful 9T hydraulic pump delivers best in class cut speed
• Fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK™ Electronics and REDLITHIUM™ Battery combine to deliver ultimate reliability in the toughest conditions
• Milwaukee® ONE KEY™ Technology allows Linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud

Key Features

• Milwaukee® POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life.
• The Milwaukee® REDLITHIUM™ Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life.
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity.
• Cuts up to 1590 Falcon ACSR, and 1/2" EHS Guy Wire
• Patent pending jaw design enables opening with just two fingers, enhancing alignment while delivering easiest operation with Class 3 Gloves
• Wire automatically closes the jaw, providing hands-free jaw closure and the easiest mid-span cuts Fully balanced design delivers the best control
• Powerful 9T hydraulic pump delivers the fastest transmission wire cuts for enhanced productivity
• Fully enclosed high speed hydraulic pump, Brushless Motor, REDLINK™ Electronics and REDLITHIUM™ Battery combine to deliver ultimate reliability in the toughest conditions
• Milwaukee® ONE KEY™ Technology allows Linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud

Key Features

• Lightest 12T Crimper
• Most Balanced with Ergonomic Grip Design
• PFM™ (Predictive Force Monitoring) with Auto Complete Ensures Full Pressure
• PFM™ (Predictive Force Monitoring) Provides Instant Pressure Verification with Green Indicator
• Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out
• Pre-Crimp Battery Check Automatically Ensures Enough Charge to Complete Each Crimp
• 350˚ Head Rotation Provides Easy Access in Tight Spaces
• Bold Alignment Marks aid accuracy in crimp placement
• The Tool Records & Stores Every Crimp Made for Professional Report Building through ONE KEY™

Key Features

• Find the most updated UL Classification Matrix in the Operators Manual
• Lightest 12T Crimper
• Most Balanced with Ergonomic Grip Design
• Bold Alignment Marks aid accuracy in crimp placement
• PFM™ (Predictive Force Monitoring) with Auto Complete Ensures Full Pressure
• PFM™ (Predictive Force Monitoring) Provides Instant Pressure Verification with Green Indicator
• Pre-Crimp Battery Check Automatically Ensures Enough Charge to Complete Each Crimp
• 350˚ Head Rotation Provides Easy Access in Tight Spaces
• The Tool Records & Stores Every Crimp Made for Professional Report Building through ONE KEY™
• Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out

Key Features

• Fully balanced design provides ultimate control and accuracy with class 3 gloves, simplifying the alignment process
• PFM: automatically modifies output based on connector, ensuring optimal pressure every time
• Fastest crimp time in the industry PFM 2.5X faster crimp speed
• Receive instant pressure verification with green light, tool records and stores every crimp made
• Weather protected electronics keep dirt, dust and moisture out
• Hydraulic system is optimized for consistent performance from 0-degreeF - 122-degreeF
• Brushless motor delivers up to 4X longer life
• In-line design and 350-degree head rotation for easy access anywhere
• Tool records and stores every crimp made, 1 key enabled for professional report building
• M18 system compatible

Key Features

• Compatible with all M18 batteries
• Easily Interchangeable with 600 MCM Crimping Jaw (49-16-U000), 750 MCM Crimping Jaw (49-16-U111), and 750 MCM Cutting Jaw (49-16-2780)
• Easy-open Jaw for fastest repetitive crimping
• Hydraulic system is optimized for consistent performance from 0°F - 122°F
• In-line design and 350 degree head rotation: easy access in the tightest panels
• Kit includes full set of #8-750 MCM Aluminum 6T U Style Dies
• PFM (Predictive Force Monitoring) ensures optimal pressure every time, LED light provides instant pressure verification
• Proprietary jaw holds connector for instant alignment
• Tool records and stores every crimp made, One-Key enabled for professional report building
• Weather protected electronics keep dirt, dust and moisture out

Key Features

• Up to 1400 ft-lbs Nut-Busting Torque
• Most Compact
• Most Repeatable Torque
• POWERSTATE™ brushless motor delivers up to 1000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque
• REDLINK PLUS™ intelligence prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• Most compact cordless High Torque Impact Wrench in its class at 8.39" in length
• ONE-KEY™ Compatible: Customize, Track and Manage tool’s performance and location
• M18 FUEL with ONEKEY™ technology provides the most repeatable Impact Wrench in the industry
• Easily toggle up to four custom performance profiles that can be saved to the memory of the tool
• Features a friction ring design to ensure quick and easy socket changes
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• LED light to illuminate the work area
• Part of the M18 System, featuring over 150+ tools

Key Features

• Delivers faster than corded cutting speed and the durability of a corded saw
• Powerstate brushless motor: supplies constant power for faster cuts and reduced heat for extended life
• REDLINK PLUS intelligence: provides optimized performance and overload protection using total system communication between tool, battery and charger
• 1-key compatible: customize, track and manage tool’s performance and location
• Easily toggle between up to 4 custom performance profiles that can be saved to the memory of the tool
• Universal keyless blade clamp: QUIK-LOK universal clamp accepts all reciprocating saw blades with a concealed, keyless clamp system
• Keyless adjustable shoe: adjustable show allows user to easily change position of shoe to extend blade life
• LED light: illuminates dark work spaces
• Hang hook: allows for convenient storage on the job
• Compatible with all M18 batteries and M18 chargers

Key Features

• POWERSTATE™ Brushless Motor:
• delivers 220 ft-lbs. of fastening torque
• REDLINK PLUS™ Intelligence:
• prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ Batteries:
• deliver more work per charge and more work over the life of the battery
• ONE-KEY™ Compatible:
• Customize, Track and Manage tool’s performance and location.
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool

Key Features

• 5400 Lumens of TRUEVIEW™ High Definition Output, up to 26 hours of run-time
• TRUEVIEW™ High Definition Output provides neutral white color and produces an even beam pattern for clearer visibility
• IP67 Rated: Waterproof and Dustproof
• 26 hours of run-time
• 7 second setup 5'5" extension
• Compact Storage: Only 22" long when collapsed
• Dual Battery Design: Use one or two M18™ REDLITHIUM™ batteries
• 3 leg positions: stowed, Tripod, 180 degrees
• ONE-KEY™ capable
• 3 output modes for optimal brightness and runtime
• LED Limited Lifetime Warranty: LEDs never need to be replaced
• Part of the M18™ System, featuring 200+ solutions
• Waterproof: Fully Submersible up to 1 Meter

Key Features

• 4,400 Lumens of TRUEVIEW™ High Definition Output
• High Impact Polycarbonate Lens
• Task, Area, and Overhead Lighting
• AC In and Out: String up to 10 together
• Protected AC Plugs
• Self-Centering Metal Hook for Easy Overhead Hanging
• 180° and 360° Electronic Light Control
• Low Battery Indicator
• Powered by M18 REDLITHIUM Battery or Extension Cord
• IP54 Rated: Water and Dust Resistant
• ONE-KEY™ Integrated Tool Tracking & Security
• ONE-KEY™ Technology allows you to set light remotely from up to 100ft
• TRUEVIEW™ High Definition Output provides neutral white color and produces an even beam pattern for clear visibility
• Part of the M18™ System, Featuring 200+ Solutions
• LED Limited Lifetime Warranty: LEDs never need to be replaced

Key Features

• Auto Distance Control Continuously Measures Distance & Pressure for Uniform Crimp Appearance Across All Sizes
  Click Here to learn more about Auto Distance Control
• Easy Access Latch & One Handed Close, Frees-Up Second Hand to Hold Material
• Fastest Dieless Crimper
• Instant Verification of Successful Cycle with Green LEDThe Tool Records & Stores Every Crimp Made for Professional Report Building through ONE-KEY™
• Lightest, In-Line Design & 180° Rotating Head for Easiest Alignment
• Longer Life with POWERSTATE™ Brushless Motor & Weather Protected Electronics that Keep Dirt, Dust & Moisture Out
• Low Profile Clevis and Narrow Nest for Easiest Alignment
• Pre-Crimp Battery Check Automatically Ensures Enough Charge to Complete Each Crimp
• Produces UL 486a-b Classified Connections for #6 AWG to 750 MCM Cu & Dual Rated Connectors across all leading connector manufacturers
• Up to 90 Crimps per Charge on a M18™ RedLithium™ CP2.0 Battery on 600MCM Cu

Key Features

• Lightest, Most Balanced 6T Pistol Crimper Provides Easiest Alignment When Making Connections Overhead
• Fastest Crimp Times In All Elements
• PFM™ (Predictive Force Monitoring) Ensures Full Pressure
• Pre-Crimp Battery Check Automatically Ensures Enough Charge To Complete Each Crimp
• Instant Verification Of Successful Cycle With Green LED
• Records & Stores Every Crimp Made For Professional Report Building Through ONE-KEY™
• Longer Life With POWERSTATE™ Brushless Motor & Weather Protected Electronics That Keep Dirt, Dust, And Moisture Out
• 340° Head Rotation For Easy Alignment
• Eight Interchangeable Jaws Deliver Versatility To Tackle A Variety Of Applications With One Tool

Key Features

• Enlarged trigger and slim grip designed specifically for use with Class 3 gloves
• Optimized Grip for Best Balance and Easiest Set-Up
• Predictive Force Monitoring (PFM™) with Auto Complete Ensures Full Pressure
• Fastest Crimp Times in All Elements
• Inline design and 340deg head rotation for easy access in tight spaces
• Easy to reach dual electronic release buttons enable easy activation for right and left handed users
• Unmatched control and ultimate versatility in any orientation and across multiple applications
• Eight interchangeable jaws deliver versatility to tackle a variety of jobs with a single tool
• Compatible with all industry standard W-Style dies
• Unmatched reliability with completely sealed electronics that keep dirt, dust and moisture out
• Hydraulic system optimized for consistent performance from -4 to 140F Instant verification of a successful cycle with Green LED
• Pre-crimp battery check automatically ensures enough charge to complete each crimp
• Records & stores every crimp made for profession report building through ONE-KEY™
• Compatible with the entire M18™ System

Key Features

• 50% Faster drilling speed
• Up to 750 ft-lbs. max torque
• Built for maximum control
• REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System.
• REDLITHIUM™ XC5.0 Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power.
• Ergonomically designed for the lineman and Built for Maximum Control
• Extended handle offers increased grip surface with high voltage safety gloves for improved comfort, less fatigue, and balanced maneuverability
• Integrated lanyard loop ensures easy transfer and storage
• LED light to illuminate work areas
• ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection
• POWERSTATE™ Brushless Motor and all-new mechanism delivers up to 30% Faster Drilling Speed, increasing users productivity
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• QUIK-LOK™ 7/16" Hex Chuck delivers single handed bit insertion for faster, easier accessory bit installation
• Up to 750 ft-lbs Max Torque allows effortless removal of rusted or corroded fasteners

Key Features

• Power To Cut Reinforced Concrete
• No Gas Headaches
• Up To 50% Lighter
• Cut Depth: 3.4"
• Blade Diameter: 9"
• RPM: 6,600
• Blade Arbor: 7/8"
• Onboard Water Connection: Quick Connect
• Load Indicator Light
• Weight (Bare Tool): 10.6 lbs
• RAPIDSTOP Blade Brake
• ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection
• Fully Adjustable Guard

Key Features

• Up to 50% faster than cordless competitors
• Maximum tool and jaw durability provide up to 3X longer life
• Eliminates compressors and hoses providing lower cost of ownership, greater productivity, more portability and more safety
• Installs 3/16" (4.8mm), 7/32" (6.0mm), 1/4" (6.4mm) and 9/32" (7.0mm) aluminum, steel, and stainless steel rivets
• Installs up to 500 1/4" aluminum blind rivets on one REDLITHIUM™ CP 2.0Ah battery charge
• POWERSTATE™ Brushless Motor delivers 4,500 lbs. (20kN) of pulling force for high strength blind rivets in all materials
• 1.18" stroke length
• Weighs only 5.6 lbs. with REDLITHIUM™2.0Ah battery
• Only 12.5" in length including the mandrel collector
• ONE-KEY™ Compatible: Ability to Track and Manage tools for increased productivity and investment protection
• Premium rubber over-mold withstands corrosive materials and provides increased comfort when in use
• Compatible with all M18™ batteries and chargers

Key Features

• Delivers up to 50% Faster Installation by replacing the hand tool or two tool installation process with the POWERSTATE™ brushless motor and torque wrench in one tool
• Precise Torque Accuracy of up to ±2% CW, ±3% CCW of full scale for torque critical fasteners
• Faster, More Productive Torque Reporting w/ ONE-KEY™ providing torque data and customizable reports for inspectors or owners
• ONE-KEY™ technology allows for customization, tracking, tool security, and inventory management
• Adjustable run-down torque to control the tools output torque via the motor to prevent over torque
• Four notification modes that the tool is reaching, meeting or exceeding the torque target (audible, LED, LCD, and vibratory)
• Four measurement modes (ft-lb, in-lb, Nm, Kgcm)
• Six pre-programmed languages including English, Spanish and French
• Durable design to withstand the most demanding jobsite environments
• Certificate of tool calibration is valid for 12 months from the date of first use
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• Compatible with all M12™ batteries & Chargers

Key Features

• Up To 60% More Power: 1,200 in-lbs of torque
• REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
• M18 REDLITHIUM™ XC5.0 Battery Pack (Not Included): Delivers more work per charge and more work over the life of the pack than competitors
• ONE-KEY™ Compatible: Ability to Customize, Track, and Manage tools for increased productivity and protection of users investment
• LED on foot of tool for better lighting in dark spaces
• Compatible with all M18 Batteries

Key Features

• POWERSTATE Brushless Motor: Provides 2 ft-lbs of impact energy, 1,330 RPM, and 4,800 BPM
• With the M18 REDLITHIUM HIGHOUTPUT 6.0 Battery, the M18 FUEL 1" SDS Plus Rotary Hammer can deliver up to 125 holes of runtime of 3/8" x 2" holes
• REDLINK PLUS intelligence: integrates full-circle communication between tool, battery and charger
• Fastest drilling rotary hammer in class
• AUTOSTOP Kickback Control enhances safety by electronically sensing a tool bind-up and shutting the tool off
• AVS Anti-Vibration System: Minimizes vibration for maximum comfort
• 3 Mode: Rotary Hammer, Hammer Only, Rotary Only
• Compatible with ONE-KEY™ to Track and Manage

Key Features

• 1-1/4" Stroke length removes more material with each stroke
• POWERSTATE™ Brushless Motor: Increased cutting speed and power throught the toughtest applications
• Customize, Track and Manage tool’s performance and location.
• REDLINK™ Plus Intelligence: The most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total sysem communication between tool, battery and charger
• Anti-Corrosion Blade Clamp delivers prolonged blade clamp durability with less downtime due to corrosion
• Lever Action QUIK-LOK™ Blade Clamp provides fast and easy blade changes
• Unlimited customization of cut speed and trigger ramp up through the ONE-Key App
• Easily toggle between 3 custom performance profiles that can be saved to the memory of the tool
• Selectable Cut Brake Feature: Monitors the load on the tool throughout the cut and automatically stops the blade as it exits the material at the end of the cut in most applications
• One-Key compatible: Customize, Track and manage tool performance and location
• Hang hook: allows for convenient storage on the job
• Metal Reinforced Battery Connection provides improved durability and battery retention over life
• Built-In LED light illuminates the work surface while cutting
• Adjustable shoe extends the life of the blade
• Compatible with all M18 batteries and M18 chargers

Key Features

• Auto-rotating mechanism provides quick, uniform expansions
• Lightest, most compact 2” experience
• Fastest 1 ¼”-2” expansions for up to 3X faster connections
• Integrated cone design of the dedicated 2” head enables tight quarter access
• Pipe size selector optimizes the fastest expansion speed
• Compact D-Handle design for balanced one-handed connections
• All-metal gears and integrated metal frame for maximum jobsite durability
• Capacity: 3/8 in. to 2 in.
• LED work light illuminates work space in dark locations
• Compatible with all M18™ REDLITHIUM™ batteries and chargers
• ONE-KEY™ technology allows for tracking, tool security, and inventory management

Key Features

• Cordless Hydraulic System Expands 2in. to 3 in. Uponor PEX
• Compatible With 2"- 3" Uponor® ProPEX®
• Quick Cam Mechanism for Fast, Continuous Expansion
• Built-in Auto Rotate Mechanism for Effortless, One-Handed Use
• All-Metal Gears and Integrated Magnesium Frame for Maximum Jobsite Durability
• LED Work Light Illuminates Work Space in Dark Locations
• Battery Fuel Gauge displays remaining run-time
• ONE-KEY™ Compatible to Track, Secure and Manage
• Warranty: 5-year Tool and 3-year Battery

Key Features

Key Features

• POWERSTATE™ Brushless Motor:
• delivers 210 ft-lbs. of fastening torque
• REDLINK PLUS™ Intelligence:
• prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ Batteries:
• deliver more work per charge and more work over the life of the battery
• ONE-KEY™ Compatible:
• Customize, Track and Manage tool’s performance and location.
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool

Key Features

• POWERSTATE™ Brushless Motor delivers up to 30% Faster Driving Speed, increasing productivity
• Most Compact Impact Driver at 4.59" in length providing more access in tight spaces
• Up to 25% More Torque with up to 2,000in-lbs to complete more demanding applications
• REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ System.
• REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
• M18 REDLITHIUM™ Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors
• ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection
• Select between four Custom Drive Control modes that deliver the ability to adjust the speed and power for the application at hand
• One-handed bit insertion for faster, easier changing of bits
• LED light to illuminate the work area
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Belt clip and Bit Holder included
• Compatible with all M18 Batteries

Key Features

• Delivers up to 50% Faster Installation by replacing the hand tool or two tool installation process with the POWERSTATE™ brushless motor and torque wrench in one tool
• Precise Torque Accuracy of up to ±2% CW, ±3% CCW of full scale for torque critical fasteners
• Faster, More Productive Torque Reporting w/ ONE-KEY™ providing torque data and customizable reports for inspectors or owners
• ONE-KEY™ technology allows for customization, tracking, tool security, and inventory management
• Adjustable run-down torque to control the tools output torque via the motor to prevent over torque
• Four notification modes that the tool is reaching, meeting or exceeding the torque target (audible, LED, LCD, and vibratory)
• Four measurement modes (ft-lb, in-lb, Nm, Kgcm)
• Six pre-programmed languages including English, Spanish and French
• Durable design to withstand the most demanding jobsite environments
• Certificate of tool calibration is valid for 12 months from the date of first use
• REDLINK PLUS™ Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity.
• REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery
• Compatible with all M12™ batteries & chargers

Key Features

• POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench
• Unmatched Productivity with the runtime to Remove & Install up to 120 Lug Nuts on a single HIGH OUTPUT™ HD12.0Ah battery
• ONE-KEY™ enabled Lug Nut Mode Prevents Over-Torque and More Control by automatically shutting off the tool
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power.
• ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection. Includes the ability to set a repeatable torque output for maximum control
• A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use.
• Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
• 360° adjustable and removable side handle
• Lanyard loop included allows for safer use and easier storage
• REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery pack: 50% more power and runs 50% cooler vs M18 REDLITHIUM HD
• Compatible with all M18™ batteries

Key Features

• POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench
• Unmatched Performance with the runtime to install Up To 200 1-1/4" Bolts on a single HIGH OUTPUT™ HD12.0Ah battery
• Eliminates Compressors and Hoses, providing greater productivity, portability, and lower cost of ownership
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power.
• ONE-KEY™ Compatible: Ability to Customize, Track and Manage tools for increased productivity and investment protection. Includes the ability to set a repeatable torque output for maximum control
• Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
• 360° adjustable and removable side handle
• Integrated lanyard loop allows for safer use and easier storage
• REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Compatible with all M18™ batteries
• A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use.

Key Features

• POWERSTATE™ Brushless Motor:
• delivers 220 ft-lbs. of fastening torque
• REDLINK PLUS™ Intelligence:
• prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ XC5.0:
• Batteries deliver more work per charge and more work over the life of the battery
• ONE-KEY™ Compatible:
• Customize, Track and Manage tool’s performance and location.
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool

Key Features

• POWERSTATE™ Brushless Motor:
• delivers 1,800 in-lbs of fastening torque for faster driving speeds
• REDLINK PLUS™ Intelligence:
• prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ Batteries:
• deliver more work per charge and more work over the life of the battery
• ONE-KEY™ Compatible:
• Customize, Track and Manage tool’s performance and location.
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool

Key Features

• POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications.
• REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
• REDLITHIUM™ HIGH OUTPUT™ Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market.
• Includes a RAPIDSTOP™ Brake, to quickly stop accessories and Enhance Safety
• Slide Switch Designed to Reduce User Fatigue
• Tool-Free Guard Adjustment for faster guard installations and adjustments
• Tool-Free Accessory Change with Integrated FIXTEC Technology
• Electronic Clutch for Kickback Protection
• 5/8"-11 Spindle for Use with Common Grinding Accessories
• Overload Protection to Maximize Motor Life
• Anti-Vibration Side Handle for Increased User Comfort and Safety
• ONE-KEY™ Tracking and Tool Management
• Compatible with all M18™ batteries

Key Features

• POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 4-1/2" / 5" Braking Grinder with ONE-KEY™ delivers 8,500 RPM to provide the power to complete the toughest grinding and cutting applications.
• REDLINK PLUS Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
• REDLITHIUM™ HIGH OUTPUT™ Battery Pack: Provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ Battery. Superior pack construction, electronics and performance deliver more work per charge and more work over pack lifespan than any battery on the market.
• Includes a RAPIDSTOP™ Brake, to quickly stop accessories and Enhance Safety
• Paddle Switch Design for Increased Comfort and Ease-Of-Use when Operating in Various Positions
• Tool-Free Guard Adjustment for faster guard installations and adjustments
• Tool-Free Accessory Change with Integrated FIXTEC Technology
• Electronic Clutch for Kickback Protection
• 5/8"-11 Spindle for Use with Common Grinding Accessories
• Overload Protection: Maximizes motor life
• Anti-Vibration Side Handle for Increased User Comfort and Safety
• ONE-KEY™ Tracking and Tool Management
• Compatible with all M18™ batteries

Key Features

• 1,250 Yards of Beam Distance
• 4,250 Lumens of TRUEVIEW™ High Definition Output
• Spot and Flood Mode
• Power with Vehicle or M18 Battery
• ONE-KEY™ Compatible
• TRUEVIEW™ High Definition Output
• Weather & Outdoor Rated
• Impact & Vibration Resistant
• Limited Lifetime LED Warranty

Key Features

• POWERSTATE™ Brushless Motor: Purposely built for the M18 FUEL™ 1/2" Drill/Driver to provide Up To 60% More Power than the competitive set
• Only 6.9" in length for access into tight spaces and reduced fatigue
• Anti-Kickback technology: Increases control in bind-up situations and reduces nuisance shut downs
• Up To 60% More Power: 1,200 in-lbs of torque
• REDLINK PLUS™ Intelligence: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
• M18 REDLITHIUM™ XC5.0 Battery Pack: Delivers more work per charge and more work over the life of the pack than competitors
• ONE-KEY™ Compatible: Ability to Customize, Track, and Manage tools for increased productivity and protection of users investment
• LED on foot of tool for better lighting in dark spaces
• Compatible with all M18 Batteries

Key Features

• 1080p camera resolution providing the industry's clearest image inside of drain lines
• 34 mm self-leveling camera head
• 12 mm Push Cable Diameter provides stiffness to push maximum distance
• Powered by the M18™ 500GB Control Hub
• Telescoping handle and wide wheelbase provide maximum stability
• On board monitor mount for viewing and transportation
• Swap batteries without system shutdown

Key Features

• 1080p camera resolution providing the industry's clearest image inside of drain lines
• 34 mm self-leveling HD camera head with Sapphire lens
• 325’ 12 mm Push Cable provides stiffness to push maximum distance
• Powered by the M18™ 500GB Control Hub
• Telescoping handle and wide wheelbase provide maximum stability
• Onboard monitor mount for viewing and transportation
• Swap batteries without system shutdown

Key Features

• 1080p camera resolution providing the industry's clearest image inside of drain lines
• 25 mm self-leveling HD camera head with Sapphire Crystal lens
• 200' 10 mm Push Cable provides best mix of stiffness, flexibility and length.
• Powered by the M18™ 500GB Control Hub
• Telescoping handle and wide wheelbase provide maximum stability
• Onboard monitor mount for viewing and transportation
• Swap batteries without system shutdown

Key Features

• POWERSTATE™ Brushless Motor: delivers 1,200 in-lbs of Peak Torque and up to 2,000 RPM for Faster Drilling Speeds
• REDLINK PLUS™ Intelligence: prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ Batteries: deliver more work per charge and more work over the life of the battery
• ONE-KEY™ Compatible: Customize, Track and Manage tool’s performance and location.
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool

Key Features

• POWERSTATE™ Brushless Motor:
• delivers 1,200 in-lbs of Peak Torque and up to 2,000 RPM for Faster Drilling Speeds
• REDLINK PLUS™ Intelligence:
• prevents damage to the tool and battery due to overloading or overheating
• REDLITHIUM™ Batteries:
• deliver more work per charge and more work over the life of the battery
• ONE-KEY™ Compatible:
• Customize, Track and Manage tool’s performance and location.
• Easily toggle between up to four custom performance profiles that can be saved to the memory of the tool